RAM boot might prove useful when there is no other way to install ReactOS (mostly a case on modern notebooks that can boot only from the xHCI USB ports). Installation from RAM disk is possible since 0.4.11 release.
- 1 Prepare the RAM bootable USB drive
- 2 Prepare the RAM bootable CD/DVD/BD
- 3 Known issues
- 4 External links
Prepare the RAM bootable USB drive
You will need installfreeldr tool to write the FreeLDR boot sector, you can extract it from dev build images.
Execute installfreeldr as following:
installfreeldr X: FAT32
Where X is a drive letter assigned to your USB drive, if your drive is formatted using FAT16 file system, use the FAT option instead. As pointed out by the tool itself, you need to get freeldr.sys and freeldr.ini files there. You can extract freeldr.sys from BootCD/LiveCD image, and create the blank freeldr.ini file. You may have to mark the volume on your USB drive as active, you can do that with DISKPART tool, or some 3rd party partition manager.
You can use syslinux to chainload FreeLoader, syslinux is included in most Linux distributions. Format USB drive using FAT32 file system and add the boot flag (GParted can do this for you).
Install syslinux on USB drive:
syslinux --install /dev/sdxy
Where xy is an ID assigned to your USB drive. Copy chain.c32 and its dependencies (libcom32.c32 and libutil.c32) onto USB drive, and create syslinux.cfg with following configuration:
DEFAULT chain.c32 file=freeldr.sys seg=0x0F80
Copy freeldr.sys (can be extracted from BootCD/LiveCD) onto USB drive, and create blank freeldr.ini on it.
Setting up FreeLoader
Now you will need to configure FreeLoader to load the ISO image to RAM and boot ReactOS from RAM disk. Here is the example of freeldr.ini configured to load the Setup or Live image:
[FREELOADER] DefaultOS=Setup TimeOut=5 [Display] TitleText=ReactOS Setup StatusBarColor=Cyan StatusBarTextColor=Black BackdropTextColor=White BackdropColor=Blue BackdropFillStyle=Medium TitleBoxTextColor=White TitleBoxColor=Red MessageBoxTextColor=White MessageBoxColor=Blue MenuTextColor=Gray MenuColor=Black TextColor=Gray SelectedTextColor=Black SelectedColor=Gray ShowTime=No MenuBox=No CenterMenu=No MinimalUI=Yes TimeText=Seconds until highlighted choice will be started automatically: [Operating Systems] Setup="Setup" LiveCD="LiveCD" [Setup] BootType=ReactOSSetup SystemPath=ramdisk(0) Options=/RDPATH=bootcd.iso [LiveCD] BootType=Windows2003 SystemPath=ramdisk(0)\reactos Options=/MININT /RDPATH=livecd.iso /RDEXPORTASCD
You can just copy & paste the configuration from above to your newly created freeldr.ini file.
At this point, the USB drive is fully prepared to RAM boot your ReactOS ISO image, just copy it there (and remember to rename it as specified in freeldr.ini).
Prepare the RAM bootable CD/DVD/BD
Of course, it is possible to load the ReactOS image into RAM from compact discs as well. You can install ReactOS through optical drive connected to xHCI USB port (or any other unsupported interface).
You will need mkisofs utility (download the Win32 version here). Create the new folder anywhere you want and name it whatever you want (I will use "cdfiles" as a name here), this folder will hold the data that will be later burned onto a CD. Create freeldr.ini file in cdfiles folder, you can take the configuration from above. Extract setupldr.sys and its ISO boot sector (isoboot.bin) from BootCD/LiveCD image to cdfiles\loader (create the folder). Copy ReactOS BootCD and/or LiveCD to cdfiles folder, and then execute mkisofs as following:
mkisofs -no-emul-boot -eltorito-boot loader/isoboot.bin -o RAMBootCD.iso cdfiles
Now you should get the ISO image generated by mkisofs, which is ready to be burned onto optical disc. You can check the ISO image in VM software to make sure everything is alright.
Syslinux did not install properly on your USB drive. Delete all the partitions on USB drive with GParted, create the new FAT32 partition and choose "Align to: Cylinders" option.
Load process of RAM-disk stuck on the screen with the progress bar
- Wait a bit more. It may take 1-10 minutes, depending on your USB drive and controller. If you are using USB 1.1 drive or controller, expect it to take hours until ReactOS image is loaded into RAM.
- Retry with a different USB-stick. The problem may be related to the local incompatibility of the computer's USB chipset and the internal controller of the USB flash drive.
The "Opening hive failed!" error
After the 1st stage setup, you will (most likely) get the "Opening hive failed!" error when attempting to load into 2nd stage setup. A workaround is to boot into LiveCD, check the drive and partition numbers using DISKPART, and update your freeldr.ini accordingly (in most cases, just need to lower rdisk value by 1). An another "hit or miss" method is to press F8 in FreeLDR menu, choose "Custom Boot" option, then "ReactOS" option, and keep trying until you find the correct drive/partition numbers and successfully load ReactOS.
1st stage setup freezes randomly
It might happen due to following reasons:
- You are installing ReactOS over an existing system installation. If so, please use some bootable partition manager (GParted for example), and remove all the partitions on the internal drive.
- You are installing ReactOS on hardware with OHCI/UHCI (USB 1.0/1.1) or EHCI (USB 2.0) USB controller. Unplug all the USB devices and try again, if that doesn't help, unplug the USB drive with ReactOS installation, right after the RAM disk loading process is complete, it is not needed for setup. If you still have issues with setup, you have to create your own build with USB components disabled.
The "Setup could not find a harddisk." error
It means that either the UniATA driver has regressed and it does not work with your SATA controller at the moment, or your drive controller is just not supported. It is also known that UniATA does not work with SATA controllers found in AMD Ryzen systems. Please try the older ReactOS version (but not older than 0.4.11), and/or wait until it is fixed in master. You can also create the JIRA issue, if you believe your issue is not known yet. Note that ReactOS has no NVMe driver, so you can't install ReactOS on NVMe SSDs.
1st stage setup hangs at "Flushing cache"
It seems like older operating systems (Windows 2003 and older also are affected) are having issues with reboot command on some modern computers, they won't reboot but just hang after all the shutdown tasks are done. Just wait a moment to ensure that the data was properly saved and then manually reset your computer, unfortunately you have to do it each time you want to reboot your computer.