0.3.4 released

Post by **Ged** » Tue Jan 22, 2008 2:07 pm

http://www.reactos.org/en/news_page_40.html

3 months isn't bad. Let's try for 2 next time

Post by **gabrielilardi** » Tue Jan 22, 2008 2:15 pm

Great job! ReactOS rocks!
My compliments to the team.

videlux · Post by **videlux** » Tue Jan 22, 2008 2:52 pm

Thanks to the whole team and to the developers in particular.

I´m just downloading it in an internet-cafe.
I´m very curious to test it tonight at home.

Good luck to all

videlux

dreams · Post by **dreams** » Tue Jan 22, 2008 2:56 pm

Congratulations and a big thanks to all the devs for their hard work :)

be59 · Post by **be59** » Tue Jan 22, 2008 3:51 pm

Gratulation!!!
*i hope, this is right*
so
what do i say????
I don't know
Again gratulation=)

Guennie1568 · Post by **Guennie1568** » Tue Jan 22, 2008 5:37 pm

First i will test it on real hardware and I hope that the PS/2 bug is fixed.
I'm sure that it works well on virtual machines, but on real hardware.....

Davy Bartoloni · Post by **Davy Bartoloni** » Tue Jan 22, 2008 6:40 pm

Thx ! , i'm trying it on a real machine now!

reactosfan · Post by **reactosfan** » Tue Jan 22, 2008 6:45 pm

My test machine just got it (Dell optiplex GX1 550+). The 0.33 was installed before without problems and worked! But now after reactos set-up, no response to the keyboard - maybe a usb keyboard works? I can try it later...

reactosfan · Post by **reactosfan** » Tue Jan 22, 2008 8:00 pm

my dell does perfectly install ros 0.30 rc1. I just grabbed the cd. So it looks like still the ps/2 bug is in the code...

Guennie1568 · Post by **Guennie1568** » Tue Jan 22, 2008 8:59 pm

I can't install ReactOS 0.3.4 on real HW and I can't dowaload and test 0.3.4 KDBG version. It is on no download mirror.
The normal 0.3.4 vers. has the keyboard bug again

Post by **Stefan100** » Tue Jan 22, 2008 10:13 pm

1. If you actually want to try out ReactOS without having to fight numerous additional problems, run it on a virtual machine (VM), NOT on hardware.

2. Builds with kdbg enabled (at least, the DBG versions should have kdbg enabled right now...) can be found here: http://www.reactos.org/getbuilds/

reactosfan · Post by **reactosfan** » Tue Jan 22, 2008 10:26 pm

Stevie, normally the releases prone to hardware we were able to install on hardware. To release a install version for real hardware without mentioning it does not work on real hardware but only on virtual machines makes no sense at all. In addition it could bee this bug is only shown on some hardware - so I do not need this "simple advice" of you - get it...

Guennie1568 · Post by **Guennie1568** » Tue Jan 22, 2008 10:30 pm

But I don't like VMs. Everyone can test everything on VMs but i want to try it on real hardware. I know that it runs on VMWare, but ROS must run on actual hardware too. Or do the devs only want to install it on virtual hardware in the future?

Post by **Z98** » Tue Jan 22, 2008 10:39 pm

The release ISO is already built with debug support turned on.

Guennie1568 · Post by **Guennie1568** » Tue Jan 22, 2008 10:44 pm

I think, I must build a second PC to print debug output from the ReactOS PC

0.3.4 released

0.3.4 released

Re: 0.3.4 released

Just tried, problem PS/2??

hardware checked by ros 0.30 rc1

We are not stupid but testers

Who is online