Black screen during install

Ask your support questions in here

Moderator: Moderator Team

Post Reply
rrip
Posts: 2
Joined: Thu Mar 01, 2012 1:17 am

Black screen during install

Post by rrip »

Trying to install ReactOS on AMD64 machine with 2GB memory. It hangs on install with a black screen. Connecting a serial cable to it generates the following:

Code: Select all

(boot\freeldr\freeldr\arch\i386\hwpci.c:52) err: Invalid routing table
(boot\freeldr\freeldr\arch\i386\hwpci.c:52) err: Invalid routing table
(ntoskrnl\kd\kdio.c:326) -----------------------------------------------------
(ntoskrnl\kd\kdio.c:327) ReactOS 0.3.14 (Build 20120205-rUNKNOWN)
(ntoskrnl\kd\kdio.c:329) 1 System Processor [0 MB Memory]
(ntoskrnl\kd\kdio.c:330) Command Line: /NOGUIBOOT /DEBUGPORT=COM1 /FIRSTCHANCE
(ntoskrnl\kd\kdio.c:334) ARC Paths: multi(0)disk(0)cdrom(31) \ multi(0)disk(0)cd
rom(31) \reactos\
(ntoskrnl\ke\i386\cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4
 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE
 KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW  KF_XMMI64  KF_NX_BIT
(ntoskrnl\ke\i386\cpu.c:801) Prefetch Cache: 64 bytes   L2 Cache: 524288 bytes L
2 Cache Line: 64 bytes  L2 Cache Associativity: 16
(ntoskrnl\mm\ARM3\mminit.c:1316) HAL I/O Mapping at FFFE0000 is unsafe
(ntoskrnl\mm\mminit.c:243)           0x80000000 - 0x81000000    Boot Loaded Imag
e
(ntoskrnl\mm\mminit.c:247)           0xB0000000 - 0xB0BA0000    PFN Database
(ntoskrnl\mm\mminit.c:251)           0xB0BA0000 - 0xB4958000    ARM³ Non Paged
Pool
(ntoskrnl\mm\mminit.c:255)           0xBC000000 - 0xBD000000    System View Spac
e
(ntoskrnl\mm\mminit.c:259)           0xBD000000 - 0xC0000000    Session Space
(ntoskrnl\mm\mminit.c:262)           0xC0000000 - 0xC0300000    Page Tables
(ntoskrnl\mm\mminit.c:265)           0xC0300000 - 0xC0400000    Page Directories

(ntoskrnl\mm\mminit.c:268)           0xC0400000 - 0xC0800000    Hyperspace
(ntoskrnl\mm\mminit.c:272)           0xE1000000 - 0xF2400000    ARM³ Paged Pool

(ntoskrnl\mm\mminit.c:275)           0xF2400000 - 0xF7BE0000    System PTE Space

(ntoskrnl\mm\mminit.c:278)           0xF7BE0000 - 0xFFBE0000    Non Paged Pool E
xpansion PTE Space
(hal\halx86\legacy\bussupp.c:591) Your machine has a PCI-to-PCI or CardBUS Bridg
e. PCI devices may fail!
(hal\halx86\legacy\bussupp.c:620) Found parent bus (indicating PCI Bridge). PCI
devices may fail!

====== PCI BUS HARDWARE DETECTION =======

00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea
] (rev a1)
        Subsystem: GA-7VAX Mainboard [1458:5001]
        Flags: bus master, 66MHz, latency 0

00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev
a2)
        Subsystem: Unknown [1458:0c11]
        Flags: bus master, 66MHz, latency 0

00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
        Subsystem: Unknown [1458:0c11]
        Flags: 66MHz, latency 0, IRQ 05
        I/O ports at fc00 [size=1K]
        I/O ports at 1c00 [size=1K]
        I/O ports at f400 [size=1K]
        Device is using IRQ 5! ISA Cards using that IRQ may fail!

00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5
] (rev a2)
        Subsystem: Unknown [1458:0c11]
        Flags: 66MHz, latency 0

00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f
1] (rev a3)
        Subsystem: GA-7VAX Mainboard [1458:5004]
        Flags: bus master, 66MHz, latency 0, IRQ 10
        Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
        Device is using IRQ 10! ISA Cards using that IRQ may fail!
        Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your
BIOS!

00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f
2] (rev a3)
        Subsystem: GA-7VAX Mainboard [1458:5004]
        Flags: bus master, 66MHz, latency 0, IRQ 11
        Memory at fe02e000 (32-bit, non-prefetchable) [size=8K]
        Device is using IRQ 11! ISA Cards using that IRQ may fail!

00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev
a1)
        Subsystem: GLoria L [0000:0000]
        Flags: bus master, 66MHz, latency 0
        Memory at 20010100 (32-bit, non-prefetchable) [size=256]
        Memory at 2280c0c0 (32-bit, non-prefetchable) [size=16K]
        Memory at fde0fde0 (32-bit, non-prefetchable) [size=256]
        Memory at fdf0fdf0 (32-bit, non-prefetchable) [size=256]

00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10d
e:03f0] (rev a2)
        Subsystem: GA-7VAX Onboard Audio (Realtek  [1458:a002]
        Flags: bus master, 66MHz, latency 0, IRQ 07
        Memory at fe028000 (32-bit, non-prefetchable) [size=32K]
        Device is using IRQ 7! ISA Cards using that IRQ may fail!

00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2)
        Subsystem: GA-7VAX Mainboard [1458:5002]
        Flags: bus master, 66MHz, latency 0
        I/O ports at f000 [size=4K]

00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f
6] (rev a2)
        Subsystem: Unknown [1458:b002]
        Flags: bus master, 66MHz, latency 0, IRQ 11
        I/O ports at 09f0 [size=16]
        I/O ports at 0bf0 [size=16]
        I/O ports at 0970 [size=16]
        I/O ports at 0b70 [size=16]
        I/O ports at dc00 [size=1K]
        Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]

00:0d.0 VGA compatible controller [0300]: nVidia Corporation C61 [GeForce 6150SE
 nForce 430] [10de:03d0] (rev a2)
        Subsystem: Gigabyte GA-7VM400(A)M(F) Mothe [1458:d000]
        Flags: bus master, 66MHz, latency 0, IRQ 05
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fc000000 (64-bit, non-prefetchable) [size=64M]
        Device is using IRQ 5! ISA Cards using that IRQ may fail!

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] H
yperTran [1022:1100] (rev 00)
        Subsystem: GLoria L [0000:0000]
        Flags: latency 0

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] A
ddress M [1022:1101] (rev 00)
        Subsystem: GLoria L [0000:0000]
        Flags: latency 0

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] D
RAM Cont [1022:1102] (rev 00)
        Subsystem: GLoria L [0000:0000]
        Flags: latency 0

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] M
iscellan [1022:1103] (rev 00)
        Subsystem: GLoria L [0000:0000]
        Flags: latency 0

01:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gig
abit Ethernet [10ec:8169] (rev 10)
        Subsystem: Unknown [10ec:8169]
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
        I/O ports at cc00 [size=1K]
        Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
        Device is using IRQ 10! ISA Cards using that IRQ may fail!

====== PCI BUS DETECTION COMPLETE =======

PC Compatible Eisa/Isa HAL Detected
(ntoskrnl\io\pnpmgr\pnpinit.c:404) Need to build DACL
(ntoskrnl\io\pnpmgr\pnpmgr.c:2817) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCON
TROLSET\Control\Pnp) failed with status 0xc0000034
(ntoskrnl\io\pnpmgr\pnpmgr.c:2820) Firmware mapper is enabled
(ntoskrnl\io\pnpmgr\pnpreport.c:346) Reported device: DETECTEDInternal\PCI_HAL (
Root\PCI_HAL\0)
(ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(hal\halx86\legacy\bussupp.c:1149) Slot assignment for 5 on bus 0
(hal\halx86\legacy\bus\pcibus.c:719) WARNING: PCI Slot Resource Assignment is FO
OBAR
(ntoskrnl\io\iomgr\driver.c:1558) '\Driver\buslogic' initialization failed, stat
us (0xc00000c0)
(ntoskrnl\io\iomgr\driver.c:1558) '\Driver\cdrom' initialization failed, status
(0xc000000e)
(ntoskrnl\fstub\disksup.c:1508) FSTUB: (IoReadPartitionTable) No 0xaa55 found in
 partition table 0
(ntoskrnl\fstub\disksup.c:1508) FSTUB: (IoReadPartitionTable) No 0xaa55 found in
 partition table 0
(ntoskrnl\io\iomgr\iomgr.c:525) IopCreateArcNames failed: c0000034

*** Fatal System Error: 0x00000069
                       (0x00000000,0x00000000,0x00000000,0x00000000)

Entered debugger on embedded INT3 at 0x0008:0x80907044.
kdb:>
SomeGuy
Posts: 586
Joined: Mon Nov 29, 2004 9:48 am
Location: Marietta, GA

Re: Black screen during install

Post by SomeGuy »

The log says your SATA chipset is "nVidia Corporation MCP61 SATA Controller"

That is not on the list of SATA controllers supported by UINATA. http://alter.org.ua/soft/win/uni_ata/compat.php

Try setting your BIOS to use IDE emulation mode.
rrip
Posts: 2
Joined: Thu Mar 01, 2012 1:17 am

Re: Black screen during install

Post by rrip »

The Hard drive was already on PATA, only the CD was SATA. So I disabled the SATA controller through the BIOS and added a PATA CD. Now it gets all the way through the plaintext installation. It starts the GUI and asks for things such as the time/date, then reboots again. Then I get:

Code: Select all

*** STOP: 0x0000007E (0x0C0000094,0xF7AE4F7F,0xF7A1EC6C,0xF7A1E8AC)
*** UNIATA.SYS - Address F7AE4F7F base at F7ACC000, Datestamp 4f2f1454

When starting in debug mode, I get this from the serial port:

(boot\freeldr\freeldr\arch\i386\hwpci.c:52) err: Invalid routing table
(boot\freeldr\freeldr\arch\i386\hwpci.c:52) err: Invalid routing table
(ntoskrnl\kd\kdio.c:326) -----------------------------------------------------
(ntoskrnl\kd\kdio.c:327) ReactOS 0.3.14 (Build 20120205-rUNKNOWN)
(ntoskrnl\kd\kdio.c:329) 1 System Processor [0 MB Memory]
(ntoskrnl\kd\kdio.c:330) Command Line: /DEBUG /DEBUGPORT=COM1 /BAUDRATE=115200 /
SOS
(ntoskrnl\kd\kdio.c:334) ARC Paths: multi(0)disk(0)rdisk(0)partition(1) \ multi(
0)disk(0)rdisk(0)partition(1) \ReactOS\
(ntoskrnl\ke\i386\cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4
 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE
 KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW  KF_XMMI64  KF_NX_BIT
(ntoskrnl\ke\i386\cpu.c:801) Prefetch Cache: 64 bytes   L2 Cache: 524288 bytes L
2 Cache Line: 64 bytes  L2 Cache Associativity: 16
(hal\halx86\acpi\halacpi.c:696) ACPI RSDT at 0xFFD01000
(hal\halx86\acpi\halacpi.c:775) ACPI 2.0 detected
(hal\halx86\acpi\halacpi.c:828) ACPI FACP at 0xFFD03008
(hal\halx86\acpi\halacpi.c:340) Failed to find ACPI table DBGP
(hal\halx86\acpi\halacpi.c:840) ACPI DBGP at 0x00000000
(hal\halx86\acpi\halacpi.c:340) Failed to find ACPI table SRAT
(hal\halx86\acpi\halacpi.c:340) Failed to find ACPI table SRAT
(hal\halx86\acpi\halacpi.c:847) ACPI SRAT at 0x00000000
(hal\halx86\acpi\halacpi.c:797) ACPI Timer at: 1008h (EXT: 0)
(hal\halx86\acpi\halacpi.c:340) Failed to find ACPI table BOOT
(hal\halx86\acpi\halacpi.c:535) ACPI BOOT at 0x00000000
(ntoskrnl\mm\ARM3\mminit.c:1316) HAL I/O Mapping at FFFE0000 is unsafe
(ntoskrnl\mm\mminit.c:243)           0x80000000 - 0x81000000    Boot Loaded Imag
e
(ntoskrnl\mm\mminit.c:247)           0xB0000000 - 0xB0BA0000    PFN Database
(ntoskrnl\mm\mminit.c:251)           0xB0BA0000 - 0xB4958000    ARM³ Non Paged
Pool
(ntoskrnl\mm\mminit.c:255)           0xBC000000 - 0xBD000000    System View Spac
e
(ntoskrnl\mm\mminit.c:259)           0xBD000000 - 0xC0000000    Session Space
(ntoskrnl\mm\mminit.c:262)           0xC0000000 - 0xC0300000    Page Tables
(ntoskrnl\mm\mminit.c:265)           0xC0300000 - 0xC0400000    Page Directories

(ntoskrnl\mm\mminit.c:268)           0xC0400000 - 0xC0800000    Hyperspace
(ntoskrnl\mm\mminit.c:272)           0xE1000000 - 0xF2400000    ARM³ Paged Pool

(ntoskrnl\mm\mminit.c:275)           0xF2400000 - 0xF7BE0000    System PTE Space

(ntoskrnl\mm\mminit.c:278)           0xF7BE0000 - 0xFFBE0000    Non Paged Pool E
xpansion PTE Space
ACPI Compatible Eisa/Isa HAL Detected
(ntoskrnl\io\pnpmgr\pnpmgr.c:2820) Firmware mapper is disabled
(ntoskrnl\io\pnpmgr\pnpreport.c:346) Reported device: DETECTEDInternal\ACPI_HAL
(Root\ACPI_HAL\0)
(ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(ntoskrnl\ps\thread.c:119) PS: Unhandled Kernel Mode Exception Pointers = 0xF7A1
E784
(ntoskrnl\ps\thread.c:126) Code c0000094 Addr F7AE4F7F Info0 00000052 Info1 0000
0053 Info2 80806866 Info3 F7ACEBFB

*** Fatal System Error: 0x0000007e
                       (0xC0000094,0xF7AE4F7F,0xF7A1EC6C,0xF7A1E8AC)

Entered debugger on embedded INT3 at 0x0008:0x80907044.
kdb:>
Last edited by Saibamen on Sat Mar 03, 2012 1:19 am, edited 1 time in total.
Reason: Please use Code tag from BBCode
vicmarcal
Test Team
Posts: 2733
Joined: Mon Jul 07, 2008 12:35 pm

Re: Black screen during install

Post by vicmarcal »

Please, obtain a DebugLog following the Tutorials and Wiki pages. And submit a Bugreport.
Thanks a lot!
hto
Developer
Posts: 2193
Joined: Sun Oct 01, 2006 3:43 pm

Post by hto »

kdb:>
And do not forget to get a backtrace by using bt command.
linux_guru
Posts: 1
Joined: Tue Mar 27, 2012 10:11 pm

Re: Black screen during install

Post by linux_guru »

Hi, I have used ReactOS in virtual machines and on real hardware in the past. Recently, a friend gave me some old computers so I loaded Windows XP on them. One of them was a PII 300 Mhz 192 MB RAM Toshiba Satellite 4030 CDT. I tried to install ReactOS from CD but it wouldn't load the installer. (It began to boot, but stopped very quickly) I tried installing it on a Pentium III laptop (1Ghz 512 MB RAM) and it installed, but Blue Screens and keeps restarting. Any suggestions?
hto
Developer
Posts: 2193
Joined: Sun Oct 01, 2006 3:43 pm

Post by hto »

Any suggestions?
Try a recent development build — maybe the bug is fixed. If not, then obtain a debug log.
Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests