Error when I install VBoxGuestAdditions

[Borneq]

I install Reactos 0.3.14 under Virtual Box. Next I install Additions.
After reboot is error

[EmuandCo]

Try a nightly version. There it should work

[pajuelo]

Installing VBox guest additions cause a BSOD after reboot.

Regards

[Haos]

We need more details, or better - a bug report. I cannot replicate any problems with Vbox guest addons. Please make sure you dont set up vram to a value too large. 32MB should work fine.

[pajuelo]

[ external image ]

Here a screenshot of the error

[pajuelo]

[ external image ]

here sorry

[Z98]

We need version of VBox, version of ROS, and VBox settings.

[Haos]

Plus, a debug log if possible.

[pajuelo]

Debug log. VirtualBox 4.1.12


..\..\ntoskrnl\kd\kdio.c:326) -----------------------------------------------------
(..\..\ntoskrnl\kd\kdio.c:327) ReactOS 0.4-SVN (Build 20120430-r56453)
(..\..\ntoskrnl\kd\kdio.c:329) 1 System Processor [0 MB Memory]
(..\..\ntoskrnl\kd\kdio.c:330) Command Line: /DEBUG /DEBUGPORT=COM1 /BAUDRATE=115200 /SOS
(..\..\ntoskrnl\kd\kdio.c:334) ARC Paths: multi(0)disk(0)rdisk(0)partition(1) \ multi(0)disk(0)rdisk(0)partition(1) \ReactOS\
(..\..\ntoskrnl\ke\i386\cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 KF_NX_BIT
(..\..\ntoskrnl\ke\i386\cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 0 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 0
(..\..\hal\halx86\acpi\halacpi.c:782) ACPI Timer at: 4008h (EXT: 256)
(..\..\hal\halx86\acpi\halacpi.c:890) ACPI 2.0 Detected. Tables: [RSDT] [FACP]
(..\..\ntoskrnl\mm\ARM3\expool.c:907) EXPOOL: Pool Tracker Table at: 0xB39A6000 with 0xe01c bytes
(..\..\ntoskrnl\mm\ARM3\expool.c:909) EXPOOL: Big Pool Tracker Table at: 0xB3996000 with 0x10000 bytes
(..\..\ntoskrnl\mm\ARM3\mminit.c:1429) HAL I/O Mapping at FFFE0000 is unsafe
(..\..\ntoskrnl\mm\mminit.c:262) 0x80000000 - 0x81000000 Boot Loaded Image
(..\..\ntoskrnl\mm\mminit.c:266) 0xB0000000 - 0xB0925000 PFN Database
(..\..\ntoskrnl\mm\mminit.c:270) 0xB0925000 - 0xB39B5000 ARM3 Non Paged Pool
(..\..\ntoskrnl\mm\mminit.c:274) 0xBB000000 - 0xBD000000 System View Space
(..\..\ntoskrnl\mm\mminit.c:278) 0xBD000000 - 0xC0000000 Session Space
(..\..\ntoskrnl\mm\mminit.c:281) 0xC0000000 - 0xC03FFFFF Page Tables
(..\..\ntoskrnl\mm\mminit.c:284) 0xC0300000 - 0xC0300FFF Page Directories
(..\..\ntoskrnl\mm\mminit.c:287) 0xC0400000 - 0xC07FFFFF Hyperspace
(..\..\ntoskrnl\mm\mminit.c:291) 0xE1000000 - 0xF2400000 ARM3 Paged Pool
(..\..\ntoskrnl\mm\mminit.c:294) 0xF2400000 - 0xF7BE0000 System PTE Space
(..\..\ntoskrnl\mm\mminit.c:297) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space
(..\..\ntoskrnl\mm\section.c:4824) Creating ARM3 section
ACPI Compatible Eisa/Isa HAL Detected
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:3188) Firmware mapper is disabled
(..\..\ntoskrnl\io\pnpmgr\pnpreport.c:353) Reported device: DETECTEDInternal\ACPI_HAL (Root\ACPI_HAL\0)
(..\..\ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(..\..\ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(..\..\ntoskrnl\io\iomgr\driver.c:1579) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0)
(..\..\ntoskrnl\io\iomgr\driver.c:61) Deleting driver object '\Driver\BUSLOGIC'
(..\..\ntoskrnl\io\iomgr\driver.c:87) HACK: Not unloading the driver image due to critical bugs!
(..\..\drivers\bus\acpi\busmgr\bus.c:1202) Using HPET hack
(..\..\drivers\bus\acpi\acpienum.c:70) Detected duplicate device: PNP0C0F 0
(..\..\drivers\bus\acpi\acpienum.c:70) Detected duplicate device: PNP0C0F 0
(..\..\drivers\bus\acpi\acpienum.c:70) Detected duplicate device: PNP0C0F 0
(..\..\drivers\bus\acpi\buspdo.c:692) Using _BBN for bus number
(..\..\drivers\bus\acpi\buspdo.c:695) Found PCI root hub: 0
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\drivers\bus\pci\fdo.c:571) Unknown IOCTL 0x9
(..\..\drivers\bus\pci\fdo.c:571) Unknown IOCTL 0x14
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\drivers\bus\pci\pdo.c:1250) Assigning IRQ 9 to PCI device 0x4 on bus 0x0
(..\..\drivers\bus\pci\pdo.c:1267) Enabling command flags for PCI device 0x4 on bus 0x0: [Bus master] [Memory space enable] [I/O space enable]
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\lib\drivers\libusb\libusb.cpp:31) EHCI_AddDevice
(..\..\drivers\bus\pci\pdo.c:1250) Assigning IRQ 11 to PCI device 0x6 on bus 0x0
(..\..\drivers\bus\pci\pdo.c:1267) Enabling command flags for PCI device 0x6 on bus 0x0: [Bus master] [Memory space enable]
(..\..\drivers\usb\usbohci\hardware.cpp:373) Starting Controller
(..\..\drivers\usb\usbohci\hardware.cpp:516) Controller State 0
(..\..\drivers\usb\usbohci\hardware.cpp:548) Waiting 50 milliseconds for controller to transition state
(..\..\drivers\usb\usbohci\hardware.cpp:610) FrameInterval 80000000 IntervalValue 2edf
(..\..\drivers\usb\usbohci\hardware.cpp:612) Computed FrameInterval a7782edf
(..\..\drivers\usb\usbohci\hardware.cpp:620) Read FrameInterval a7782edf
(..\..\drivers\usb\usbohci\hardware.cpp:627) Computed Periodic Start 2a2f
(..\..\drivers\usb\usbohci\hardware.cpp:630) Read Periodic Start 2a2f
(..\..\drivers\usb\usbohci\hardware.cpp:673) NumberOfPorts 8
(..\..\drivers\usb\usbohci\hardware.cpp:694) Descriptor A: 1108
(..\..\drivers\usb\usbohci\hardware.cpp:713) Descriptor B: 1fe0000
(..\..\drivers\usb\usbohci\hardware.cpp:723) HCCA: 1b3000 Alignment mask: ffffff00
(..\..\drivers\usb\usbohci\hardware.cpp:763) Control 2bf
(..\..\drivers\usb\usbohci\hardware.cpp:768) OHCI controller is operational
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\lib\drivers\libusb\hub_controller.cpp:197) CHubController::Initialize
(..\..\lib\drivers\libusb\hub_controller.cpp:3728) CHubController::CreatePDO: DeviceName \Device\USBPDO-0
(..\..\lib\drivers\libusb\hub_controller.cpp:555) [USBLIB] Name USB\ROOT_HUB&VID106b&PID003f&REV0000
(..\..\lib\drivers\libusb\hub_controller.cpp:2911) USBHI_QueryDeviceInformation B36AD998
(..\..\drivers\usb\usbhub\fdo.c:1612) Status 0, Result 0x00000040
(..\..\drivers\usb\usbhub\fdo.c:1613) InformationLevel 0
(..\..\drivers\usb\usbhub\fdo.c:1614) ActualLength 40
(..\..\drivers\usb\usbhub\fdo.c:1615) PortNumber 0
(..\..\drivers\usb\usbhub\fdo.c:1616) DeviceDescriptor 20000112
(..\..\drivers\usb\usbhub\fdo.c:1617) HubAddress 0
(..\..\drivers\usb\usbhub\fdo.c:1618) NumberofPipes 0
(..\..\lib\drivers\libusb\hub_controller.cpp:3096) USBHI_GetExtendedHubInformation
(..\..\drivers\usb\usbhub\fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8
(..\..\lib\drivers\libusb\hub_controller.cpp:3403) USBDI_IsDeviceHighSpeed
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\drivers\usb\usbohci\hardware.cpp:1199) Waiting 0 milliseconds for port power up
(..\..\drivers\usb\usbohci\hardware.cpp:1145) Enabling status change
(..\..\lib\drivers\libusb\hub_controller.cpp:312) [USBLIB] SCE Request B36C6F70 TransferBufferLength 32 Flags 3 MDL 00000000
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 0: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 1: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 2: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 3: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 4: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 5: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 6: Status 0, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 7: Status 0, Change 0
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\lib\drivers\libusb\libusb.cpp:31) EHCI_AddDevice
(..\..\drivers\bus\pci\pdo.c:1250) Assigning IRQ 10 to PCI device 0xb on bus 0x0
(..\..\drivers\bus\pci\pdo.c:1267) Enabling command flags for PCI device 0xb on bus 0x0: [Bus master] [Memory space enable]
(..\..\drivers\usb\usbehci\hardware.cpp:359) Controller has 32 Length
(..\..\drivers\usb\usbehci\hardware.cpp:360) Controller EHCI Version 100
(..\..\drivers\usb\usbehci\hardware.cpp:361) Controller EHCI Caps HCSParamsLong 8
(..\..\drivers\usb\usbehci\hardware.cpp:362) Controller EHCI Caps HCCParamsLong 84
(..\..\drivers\usb\usbehci\hardware.cpp:363) Controller has 8 Ports
(..\..\drivers\usb\usbehci\hardware.cpp:248) Controller Port Routing Rules 0
(..\..\drivers\usb\usbehci\hardware.cpp:249) Number of Ports per Companion Controller 0
(..\..\drivers\usb\usbehci\hardware.cpp:250) Number of Companion Controller 0
(..\..\drivers\usb\usbehci\hardware.cpp:269) Controller supports Asynchronous Schedule Park
(..\..\drivers\usb\usbehci\hardware.cpp:481) Starting Controller
(..\..\drivers\usb\usbehci\hardware.cpp:706) Interrupt Mask 37
(..\..\drivers\usb\usbehci\hardware.cpp:805) UsbSts c000
(..\..\drivers\usb\usbehci\hardware.cpp:808) UsbCmd.PeriodicEnable 1
(..\..\drivers\usb\usbehci\hardware.cpp:809) UsbCmd.AsyncEnable 1
(..\..\drivers\usb\usbehci\hardware.cpp:810) UsbCmd.IntThreshold 8
(..\..\drivers\usb\usbehci\hardware.cpp:811) UsbCmd.Run 1
(..\..\drivers\usb\usbehci\hardware.cpp:812) UsbCmd.FrameListSize 0
(..\..\drivers\usb\usbehci\hardware.cpp:819) EHCI Started!
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\lib\drivers\libusb\hub_controller.cpp:197) CHubController::Initialize
(..\..\lib\drivers\libusb\hub_controller.cpp:3728) CHubController::CreatePDO: DeviceName \Device\USBPDO-1
(..\..\lib\drivers\libusb\hub_controller.cpp:555) [USBLIB] Name USB\ROOT_HUB20&VID8086&PID265c&REV0000
(..\..\lib\drivers\libusb\hub_controller.cpp:2911) USBHI_QueryDeviceInformation B36AD660
(..\..\drivers\usb\usbhub\fdo.c:1612) Status 0, Result 0x00000040
(..\..\drivers\usb\usbhub\fdo.c:1613) InformationLevel 0
(..\..\drivers\usb\usbhub\fdo.c:1614) ActualLength 40
(..\..\drivers\usb\usbhub\fdo.c:1615) PortNumber 0
(..\..\drivers\usb\usbhub\fdo.c:1616) DeviceDescriptor 20000112
(..\..\drivers\usb\usbhub\fdo.c:1617) HubAddress 0
(..\..\drivers\usb\usbhub\fdo.c:1618) NumberofPipes 0
(..\..\lib\drivers\libusb\hub_controller.cpp:3096) USBHI_GetExtendedHubInformation
(..\..\drivers\usb\usbhub\fdo.c:1711) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8
(..\..\lib\drivers\libusb\hub_controller.cpp:3403) USBDI_IsDeviceHighSpeed
(..\..\lib\drivers\libusb\hub_controller.cpp:312) [USBLIB] SCE Request B36C70F0 TransferBufferLength 32 Flags 3 MDL 00000000
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 0: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 1: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 2: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 3: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 4: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 5: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 6: Status 100, Change 0
(..\..\lib\drivers\libusb\hub_controller.cpp:323) [USBLIB] Port 7: Status 100, Change 0
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc000003a
(..\..\ntoskrnl\io\iomgr\iorsrce.c:725) Failed opening given symbolic link!
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\pciide.sys at F647D000 with 7 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\pciidex.sys at F6474000 with 9 pages
(..\..\drivers\bus\pci\pdo.c:1267) Enabling command flags for PCI device 0x21 on bus 0x0: [Bus master] [I/O space enable]
(..\..\drivers\storage\ide\pciidex\fdo.c:464) IRP_MJ_PNP / Unknown minor function 0x9
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\VBoxVideo.sys at F6450000 with 24 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\VIDEOPRT.SYS at F643D000 with 13 pages
(..\..\drivers\bus\pci\pdo.c:1250) Assigning IRQ 11 to PCI device 0x2 on bus 0x0
(..\..\drivers\bus\pci\pdo.c:1267) Enabling command flags for PCI device 0x2 on bus 0x0: [Bus master] [Memory space enable]
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:848) IRP_MN_QUERY_CAPABILITIES failed with status 0xc00000bb
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:681) IopInitiatePnpIrp() failed (Status 0xc00000bb)
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:4030) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\pcnet.sys at F641F000 with a pages
(..\..\drivers\network\ndis\ndis\miniport.c:2567)(NdisMRegisterMiniport) Initializing an NDIS 5.1 miniport
(..\..\drivers\bus\pci\pdo.c:1250) Assigning IRQ 10 to PCI device 0x3 on bus 0x0
(..\..\drivers\bus\pci\pdo.c:1267) Enabling command flags for PCI device 0x3 on bus 0x0: [Bus master] [Memory space enable] [I/O space enable]
(..\..\drivers\network\ndis\ndis\miniport.c:2791)(NdisMSetAttributesEx) Miniport attribute flags: 0x8
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\i8042prt.sys at F640B000 with 11 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\kbdclass.sys at F6400000 with b pages
(..\..\drivers\input\i8042prt\pnp.c:718) IRP_MJ_PNP / unknown minor function 0x9
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\VBoxMouse.sys at F63E6000 with 1a pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\mouclass.sys at F63DB000 with b pages
(..\..\drivers\input\i8042prt\pnp.c:718) IRP_MJ_PNP / unknown minor function 0x9
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\cmbatt.sys at F63CE000 with d pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\battc.sys at F63C7000 with 7 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\wmilib.sys at F63C0000 with 7 pages
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:464) \Driver\CMBATT->AddDevice(ACPI\PNP0C0A\0) failed with status 0xc0000034
(..\..\ntoskrnl\io\pnpmgr\pnpmgr.c:464) \Driver\CMBATT->AddDevice(ACPI\ACPI0003\0) failed with status 0xc0000034
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\floppy.sys at F63AE000 with 12 pages
(..\..\ntoskrnl\io\iomgr\driver.c:1579) '\Driver\FLOPPY' initialization failed, status (0xc000000e)
(..\..\ntoskrnl\io\iomgr\driver.c:61) Deleting driver object '\Driver\FLOPPY'
(..\..\ntoskrnl\io\iomgr\driver.c:87) HACK: Not unloading the driver image due to critical bugs!
(..\..\ntoskrnl\io\iomgr\driver.c:1961) IopInitializeDriver() failed (Status c000000e)
(..\..\ntoskrnl\mm\ARM3\sysldr.c:935) Leaking driver: floppy.sys
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\cdrom.sys at F639B000 with f pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\fs_rec.sys at F6392000 with 9 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\null.sys at F638B000 with 7 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\beep.sys at F6384000 with 7 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\blue.sys at F637C000 with 8 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\vbemp.sys at F6374000 with 8 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\npfs.sys at F6369000 with b pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\msfs.sys at F6362000 with 7 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\ndisuio.sys at F6358000 with a pages
(..\..\drivers\network\ndis\ndis\protocol.c:979)(ndisBindMiniportsToProtocol) Performing global bind for protocol 'NDISUIO'
(..\..\drivers\network\ndis\ndis\protocol.c:1075)(ndisBindMiniportsToProtocol) NDISUIO's BindAdapter handler returned 0x0 for \Device\{314340a9-2409-4a2a-9a56-7be83f6214ad}
(..\..\drivers\network\ndisuio\main.c:101) NDISUIO: Loaded
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\tcpip.sys at F6329000 with 2f pages
(..\..\drivers\network\ndis\ndis\protocol.c:986)(ndisBindMiniportsToProtocol) Performing standard bind for protocol 'TCPIP'
NDIS_STATUS_MEDIA_CONNECT
(..\..\drivers\network\ndis\ndis\protocol.c:1075)(ndisBindMiniportsToProtocol) TCPIP's BindAdapter handler returned 0x0 for \Device\{314340a9-2409-4a2a-9a56-7be83f6214ad}
Unhandled event type: 6
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\afd.sys at F630D000 with 18 pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\VBoxSF.sys at F62D0000 with 3d pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:2959) ZwOpenFile failed with status 0xc0000034
(..\..\ntoskrnl\mm\ARM3\sysldr.c:1195) Failed to load dependency: \SystemRoot\system32\drivers\ksecdd.sys
(..\..\ntoskrnl\mm\ARM3\sysldr.c:3169) MiResolveImageReferences failed with status 0xc0000034
(..\..\ntoskrnl\io\iomgr\file.c:421) Using IopParseDevice() hack. Requested invalid attributes: 1
(..\..\drivers\bus\acpi\main.c:276) Fixed power button reported to power manager
(..\..\drivers\bus\acpi\main.c:281) Fixed sleep button reported to power manager
(..\..\ntoskrnl\po\events.c:267) Device capabilities: 0x3 ( POWER SLEEP )
(..\..\ntoskrnl\mm\ARM3\mminit.c:1169) Loader pages freed: 113
(..\..\ntoskrnl\ex\init.c:1924) Free non-cache pages: 5cab0
WARNING: RtlCreateTagHeap at ..\..\lib\rtl\heap.c:3983 is UNIMPLEMENTED!
(..\..\base\system\smss2\sminit.c:363) Renamed file: \??\C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\nso2.tmp\nsProcess.dll-
(..\..\base\system\smss2\sminit.c:363) Renamed file: \??\C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\nso2.tmp\-
(..\..\base\system\smss2\sminit.c:2006) Processing PFRO: /\??\C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\nso2.tmp\nsProcess.dll
(..\..\base\system\smss2\sminit.c:2163) SMSS: \??\C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\nso2.tmp\nsProcess.dll => failed - Status == c0000034
(..\..\base\system\smss2\sminit.c:2006) Processing PFRO: /\??\C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\nso2.tmp\
(..\..\base\system\smss2\sminit.c:2173) SMSS: \??\C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp\nso2.tmp\ (deleted)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\dll\ntdll\ldr\ldrapi.c:811) NtCreateSection() failed (Status 0xc0000022)
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\system32\drivers\cdfs.sys at F62AE000 with c pages
(..\..\base\system\smss2\pagefile.c:908) SMSS:PFILE: Volume `\??\D:\' (3) cannot store a paging file
Boot took 29492483689 cycles!
Interrupts: 2075 System Calls: 13199 Context Switches: 195
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\System32\win32k.sys at F61A0000 with fa pages
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\System32\ftfd.dll at F613F000 with 61 pages
(..\..\subsystems\win32\csrss\csrsrv\init.c:750) Fake basesrv init
(..\..\dll\ntdll\csr\connect.c:371) Next-GEN CSRSS support
(..\..\win32ss\user\ntuser\sysparams.c:1563) err: UserSystemParametersInfo called without active windowstation.
(..\..\win32ss\user\ntuser\winsta.c:208) err: Invalid window station handle
(..\..\win32ss\user\ntuser\ntuser.c:161) err: Enter NtUserInitialize(0, 00000000, 00000000)
(..\..\win32ss\user\ntuser\display.c:79) err: InitDisplayDriver(\Device\Video0, \Registry\Machine\System\CurrentControlSet\Services\VBOXVIDEO\Device0);
(..\..\ntoskrnl\mm\ARM3\sysldr.c:174) Loading: \SystemRoot\System32\VBoxDisp.dll at F6119000 with 16 pages
err:(..\..\win32ss\user\user32\misc\dllmain.c:351) GetConnected
(..\..\win32ss\user\ntuser\hook.c:1089) err: Kill Thread Hooks pti 0xb32d2510 pdo 0x0
(..\..\win32ss\user\ntuser\sysparams.c:1563) err: UserSystemParametersInfo called without active windowstation.
(..\..\ntoskrnl\mm\ARM3\syspte.c:254) MiReserveSystemPtes: Failed to reserve 32748 PTE(s)!
Entered debugger on last-chance exception (Exception Code: 0xc0000005) (Page Fault)
Memory at 0x07FDC024 could not be written: Page not present.
kdb:>

[pajuelo]

Vbox settigs : 128 Mb ram, chipset PIIX3, PAE/NX enabled, VT-X enabled,

[Haos]

How much video ram?

[pajuelo]

128 MB video memory

[pajuelo]

I tried several video memory quantities and the problem seems to be there, with 32 mb it load to desktop but in 256 colors, with 64 mb you get a black screen and with 128 mb you get the BSOD.

Regards

[Haos]

32MB works fine for me. 256 color after addons install is reported already. You can switch the color number instantly.

[SomeGuy]

Haos, would you mind sharing details about *your* configuration?

I had no idea those were even close to working. I just tried v3.2.8 and v.4.1.14 on their respective versions of Vbox and on both I got a BSOD as it tried to display the ReactOS desktop/Explorer.