Feedback for Live-CD v0.2.9
Moderator: Moderator Team
Feedback for Live-CD v0.2.9
I tried the Live-CD v0.2.9 on 3 PCs:
- A P4 2.4GHz with Hyperthreading (Hangs with text screen telling it found a processor)
- A Duron 900MHz; Board: MSI MS-6378; Chipset: VIA KLE133 Chipset, VIA VT82C686A / 686B Chipset (hangs without displaying anything. except one short flash of a (blue) text screen. Displays error message if you eject the CD)
- A PIII 550MHz; Board: AOpen MX6B EZ; Chipset: Intel 440BX
It only runs on the PIII 550MHz but it is hard to give any feedback (bugreports) as there are no errormessages displayed on the problematic PCs. Thus booting could be a bit more verbose if you want feedback.
A LiveCD with more preinstalled software would be nice.
I would like to see
- Firefox
- OpenOffice
- Windows GTK runtime
(http://gimp-win.sourceforge.net/stable.html)
Sure Firefox and OO are nice apps to have s.th. to play with. The wish for the Windows GTK runtime may seem a bit strange, but it is hard to install this on a running LiveCD (no ramdisk or Overlay-FS). Any I would like to see if some windows-gtk-programs work. (Writing GTK programs is my favourite way of writing portable applications, and it would be nice to see that they run under ReactOS, too.)
- A P4 2.4GHz with Hyperthreading (Hangs with text screen telling it found a processor)
- A Duron 900MHz; Board: MSI MS-6378; Chipset: VIA KLE133 Chipset, VIA VT82C686A / 686B Chipset (hangs without displaying anything. except one short flash of a (blue) text screen. Displays error message if you eject the CD)
- A PIII 550MHz; Board: AOpen MX6B EZ; Chipset: Intel 440BX
It only runs on the PIII 550MHz but it is hard to give any feedback (bugreports) as there are no errormessages displayed on the problematic PCs. Thus booting could be a bit more verbose if you want feedback.
A LiveCD with more preinstalled software would be nice.
I would like to see
- Firefox
- OpenOffice
- Windows GTK runtime
(http://gimp-win.sourceforge.net/stable.html)
Sure Firefox and OO are nice apps to have s.th. to play with. The wish for the Windows GTK runtime may seem a bit strange, but it is hard to install this on a running LiveCD (no ramdisk or Overlay-FS). Any I would like to see if some windows-gtk-programs work. (Writing GTK programs is my favourite way of writing portable applications, and it would be nice to see that they run under ReactOS, too.)
-
- Posts: 13
- Joined: Wed Oct 26, 2005 5:51 pm
I have the same problems like other people here on this forum.
I have tryed the Live CD Version, the Install CD version and also the booting of the Iso Images with ISOEMU.
The results are all the same.
On a big part of the PC's the Live CD Version of Reactos fail to start becouse it freeze/hangs on the boot Process by loading the needed Drivers.
From my side of View at the Moment Reactos is only making for running under Emulation Mode like Qemu or VMWare.
Running Reactos on Real Hardware fail allways becouse the Hardware Implementation is not such good as it should.
I have tryed the Live CD Version, the Install CD version and also the booting of the Iso Images with ISOEMU.
The results are all the same.
On a big part of the PC's the Live CD Version of Reactos fail to start becouse it freeze/hangs on the boot Process by loading the needed Drivers.
From my side of View at the Moment Reactos is only making for running under Emulation Mode like Qemu or VMWare.
Running Reactos on Real Hardware fail allways becouse the Hardware Implementation is not such good as it should.
Hi
I am runing livecd on real hardware.
follow system
1. P3 800mhz
2. mainboard 440bx
3. memmory 512MB
4. graphic card ati readon 9200se and nvida tnt have been tested
5. sb 1024 live mp3
6. ps muse and keyboard
7. dvd sony
8. flopy nec
1. k6-2 350mhz is clock to
2. memroy 128MB
3. mainboard a lyckstar mainboard foget which model
4. graphic card old s3 savge4 32MB VBE 2.0
5. DVD rom sony
6. flopy nec
7. mouse ps2, keyboard Din
8. audio sb 16
1 amd 64 3000+
2. memmory 512mb
3. mainboard msi
4. graphic card ati 9200se and Nvidia tnt2
5. audio ac97 (main board)
7. mouse and keyaboard usb but it using ps/2 prot
8. dvd burnner nec
9. floppy sony.
alot more hardware
1. intel 486 100mhz
2. 32MB -> 48MB
3. dvd rom sony
4. sb16
5. graphic ciruslogic (patched frimware to vbe 2.0) 2MB
alot of other modication.
ReactOS is ruing fine with livecd on all thise machine.
on real hardware.
I am runing livecd on real hardware.
follow system
1. P3 800mhz
2. mainboard 440bx
3. memmory 512MB
4. graphic card ati readon 9200se and nvida tnt have been tested
5. sb 1024 live mp3
6. ps muse and keyboard
7. dvd sony
8. flopy nec
1. k6-2 350mhz is clock to
2. memroy 128MB
3. mainboard a lyckstar mainboard foget which model
4. graphic card old s3 savge4 32MB VBE 2.0
5. DVD rom sony
6. flopy nec
7. mouse ps2, keyboard Din
8. audio sb 16
1 amd 64 3000+
2. memmory 512mb
3. mainboard msi
4. graphic card ati 9200se and Nvidia tnt2
5. audio ac97 (main board)
7. mouse and keyaboard usb but it using ps/2 prot
8. dvd burnner nec
9. floppy sony.
alot more hardware
1. intel 486 100mhz
2. 32MB -> 48MB
3. dvd rom sony
4. sb16
5. graphic ciruslogic (patched frimware to vbe 2.0) 2MB
alot of other modication.
ReactOS is ruing fine with livecd on all thise machine.
on real hardware.
-
- Posts: 13
- Joined: Wed Oct 26, 2005 5:51 pm
Hello !
As first thank you very much for your helpfull Answers.
I would like to ask you what exactly for a hardware setup does you have.
I belive one possibility why on some PC's reactos works and on other pc it doesn't work could be that we have differnet hardware setup's.
I itself has for example on the following PC two harddisk conected to the
two IDE Controllers.
The First harddisk (hda) has 3 Partition
The second one (hdc) has 7 different Partition with four different File Systems.
If i try to install Reactos or run the Live CD version on the Following PC
Reactos allways freez at the booting process.
The last Line in the booting process is the following
"Loading drive.sys"
Here are some detailed hardware Information.
It could be great to know how much Hardisks and how much partition with different file system do you have.
Maybe you can give me also a link to a good dos or linux hardware analyse tool.
I itself has used the very good and helpfull dr hardware sys info tool
for the MSDOS Envirenment.
http://www.drhardware.de/english/pghpdrhd.htm
Thanks in advance for more Infos.
As first thank you very much for your helpfull Answers.
I would like to ask you what exactly for a hardware setup does you have.
I belive one possibility why on some PC's reactos works and on other pc it doesn't work could be that we have differnet hardware setup's.
I itself has for example on the following PC two harddisk conected to the
two IDE Controllers.
The First harddisk (hda) has 3 Partition
The second one (hdc) has 7 different Partition with four different File Systems.
If i try to install Reactos or run the Live CD version on the Following PC
Reactos allways freez at the booting process.
The last Line in the booting process is the following
"Loading drive.sys"
Here are some detailed hardware Information.
It could be great to know how much Hardisks and how much partition with different file system do you have.
Maybe you can give me also a link to a good dos or linux hardware analyse tool.
I itself has used the very good and helpfull dr hardware sys info tool
for the MSDOS Envirenment.
http://www.drhardware.de/english/pghpdrhd.htm
Thanks in advance for more Infos.
Report Dr. Hardware Sysinfo 9.0e Shareware Version
Logical Drive List
==================
Name ú Type úCapacity ú free úComment
------------------------------------------------------------------------------
A Floppy(HD,3«") n/a n/a Boot Drive
B Phantom Floppy n/a n/a -
C Harddisk 1896.1MB ? Cluster=4 KB
D Harddisk 1992.4MB 1526.1MB Cluster=2 KB
E Harddisk 50.4MB 50.4MB Cluster=512 B
F Harddisk 58.1MB 58.1MB Cluster=512 B
Hard Disks
==========
HD number : 0 ³
³ Capacity : 2062.4MB ³
³ Heads : 16 ³
³ Sectors : 63 ³
³ Cylinder : 4092 ³
³ INT13 Extension: V2.0, Disk Access:yes,Remov. Drive Ctrl:no ,EDD:yes ³
³ Name of Medium : n/a ³
³ Serial Number : n/a ³
³ FAT Name : n/a ³
³ Formatted with : n/a ³
INT13 Extension configuration parameters
========================================
³ I/O Base port : 1F0h ³ LBA active : yes ³
´ Fast PIO : yes ³
³ is Slave : no ³ Fast DMA : no ³
³ IRQ : 14 ³ Multi-Sector-Mode: yes ³
³ DMA Mode/chan.: 0 / 0 ³ 32-Bit Transfers : yes ³
³ PIO Mode : 4 ³ Translation : CHS ³
Hard Disks
==========
³ HD number : 1 ³
³ Capacity : 7816.5MB ³
³ Heads : 16 ³
³ Sectors : 63 ³
³ Cylinder : 15509 ³
³ INT13 Extension: V2.0, Disk Access:yes,Remov. Drive Ctrl:no ,EDD:yes ³
³ Name of Medium : MYDOCUMENTS ³
³ Serial Number : 42F242F3 ³
³ FAT Name : FAT32 ³
³ Formatted with : MSWIN4.1 ³
INT13 Extension configuration parameters
========================================
³ I/O Base port : 170h ³ LBA active : yes ³
´ Fast PIO : yes ³
³ is Slave : no ³ Fast DMA : no ³
³ IRQ : 15 ³ Multi-Sector-Mode: yes ³
³ DMA Mode/chan.: 0 / 0 ³ 32-Bit Transfers : yes ³
³ PIO Mode : 4 ³ Translation : CHS ³
Floppy Drives
=============
³Drive: [A:\] High Density, 3«", 1,44MB, max.135tpi ³
³Disk : 1,44 MB ³ No. : 1E05457B ³
³Bytes per Sector : 512 ³ Name: NO NAME ³
³Sectors per FAT : 9
³Sectors per Cluster : 61 ³Controller ³
³Bad Sectors : 0 (0.0KB) ³Type: NEC 72065B(->2,88MB) ³
³Reserved Sectors : 1 ³Step Rate : 6 ms ³
³Root-Dir-Entries : 224 ³Head Load : 4 ms ³
³Used sector 1 : 19 ³Head Unload : 240 ms ³
³Cluster totally/free: 65534/204 ³Head Settle : 15 ms ³
³ID-Byte : F0h ³Motor on : 1.0 sec ³
³FAT : FAT12 ³Motor off : 2.0 sec ³
(E)IDE Devices(ATA/ATAPI) - Controller Info
===========================================
³ Controller: EIDE with Dual Port, Multi Sektor, Cache ATA/ATAPI-4 ³
³ Device : Hard Disk Capacity: 2.0 GB ³
³ Model : WDC AC12100L ³
³ Ser.No : WD-WT3800367369 Rev.: 09.09M08 ³
Parameter (Cylinder/Heads/Sector) Other ´
³ Physically : 4092/63/16 (2014MB) ³ Cache : 256KB ³
³ Translation : 4092/63/16 (2014MB) ³ Security : no ³
Modes
´ Passwords: 0 ³
³ DMA: yes LBA: yes ³ DTR Rate: 5-10MBit/s ³
³ 32-Bit I/O: no IORDY: yes (switcheable) ³ Rotation-Tol.: <0,5% ³
³ Multi Sector: yes, Sekt/Int: currently 16, max.16³ Formatting Tol: yes ³
PIO/DMA Mode => Cycle time (ns) ÄÄÄÄÄÄÄÄÄÄ´ sectored : hard ³
³ Pio Mode : 2 => current mode : 240 ³ Data Offset: no ³
³ EPIO Modes: 3 4 => with(out) IORDY: 160/120 ³ Encoding : RLL ³
³ Single DMA: - => current mode : 960 ³ Non-stepper-motor: yes ³
³ Multi DMA : 0 1 2ø => minimum/optimum: 120/120 ³ Head change: >15æs ³
³ UDMA33/66 : 0 1 2 ÚÄ Features (a=active)
³ UDMA100/133: - ³ a.o: SMART Write-Cache ³
(E)IDE Devices(ATA/ATAPI) - Controller Info
===========================================
³ Controller: EIDE with Dual Port, Multi Sektor, Cache ATA/ATAPI-5 ³
³ Device : Hard Disk Capacity: 32.0 MB ³
³ Model : WDC WD80EB-28CGH2 ³
³ Ser.No : WD-WCA9N8271577 Rev.: 24.84G24 ³
ÃÄ Parameter (Cylinder/Heads/Sector)ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ Other
³ Physically : 15509/63/16 (7633MB) ³ Cache : 768KB ³
³ Translation : 15509/63/16 (7633MB) ³ Security : no ³
ÃÄ Modes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ Passwords: 64 ³
³ DMA: yes LBA: yes ³ DTR Rate: 5-10MBit/s ³
³ 32-Bit I/O: no IORDY: yes (switcheable) ³ Rotation-Tol.: <0,5% ³
³ Multi Sector: yes, Sekt/Int: currently 16, max.16³ Formatting Tol: yes ³
ÃÄÄÄÄÄÄÄ PIO/DMA Mode => Cycle time (ns) ÄÄÄÄÄÄÄÄÄÄ´ sectored : hard ³
³ Pio Mode : 2 => current mode : 240 ³ Data Offset: no ³
³ EPIO Modes: 3 4 => with(out) IORDY: 120/120 ³ Encoding : RLL ³
³ Single DMA: - => current mode : 960 ³ Non-stepper-motor: yes ³
³ Multi DMA : 0 1 2ø => minimum/optimum: 120/120 ³ Head change: >15æs ³
³ UDMA33/66 : 0 1 2 ÚÄ Features (a=active)
³ UDMA100/133: 3 4 5 ³ a.o: SMART(a) Write-Cache(a) AAM(off) ³
(E)IDE Devices(ATA/ATAPI) - Controller Info
===========================================
³ Controller: EIDE (ATAPI), 12Byte-Commands ³
³ Device : CD-ROM device (changeable) Capacity: n/a ³
³ Model : SAMSUNG CD-ROM SC-148F ³
³ Ser.No : Rev.: PS04 ³
ÃÄ Parameter (Cylinder/Heads/Sector)ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ Other
³ Physically : 0/0/0 (0MB) ³ Cache : 0KB ³
³ Translation : 0/0/0 (0MB) ³ Security : no ³
ÃÄ Modes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ Passwords: 0 ³
³ DMA: yes LBA: yes ³ DTR Rate: n/a ³
³ 32-Bit I/O: no IORDY: yes ³ Rotation-Tol.: n/a ³
³ Multi Sector: no , Sekt/Int: currently 0, max.0 ³ Formatting Tol: n/a ³
ÃÄÄÄÄÄÄÄ PIO/DMA Mode => Cycle time (ns) ÄÄÄÄÄÄÄÄÄÄ´ sectored : n/a ³
³ Pio Mode : 4 => current mode : ? ³ Data Offset: n/a ³
³ EPIO Modes: 3 4 => with(out) IORDY: 227/120 ³ Encoding : n/a ³
³ Single DMA: 0 1 2 => current mode : 240 ³ Non-stepper-motor: n/a ³
³ Multi DMA : 0 1 2 => minimum/optimum: 120/150 ³ Head change: n/a ³
³ UDMA33/66 : - ÚÄ Features (a=active)
³ UDMA100/133: - ³ a.o: n/a ³
Mainboard
=========
ÚÄÄ Processor
³ CPU : PENTIUM Stepping: , Real Mode ³
³ CPU Clock : 99.7 MHz ³
³ Internal ID : 5h/2h/5h, (c)GenuineIntel ³
³ Serial Number : n/a ³
³ L1-Cache : active ³
³ Instruction Set: none ³
³ Multiprocessor : no ³
ÃÄÄ Board properties, Memory
³ Coprocessor : internal ³
³ Chipset (-ID) : Intel 430FX PCI Chipset ³
³ PC Model/Board : n/a ³
³ L2-/L3Cache : missing, disabled or not found / 0 KB ³
³ Bus type : PCI V 2.10 ³
³ Memory Modules : 128MB EDO ³
BIOS Informations
=================
Vendor / date : Phoenix V00.04
Version string : n/a
Date : 09/04/97
Copyright : Copyright 1985-1994 Phoenix Technologies Ltd
Model Bytes : FCh/1h/0h (Model/Sub Model/Revision)
Plug&Play : V 1.0 (Real-Mode Entry: F000:7514)
32-Bit Services: at F000:DBC0, Entry: F83B7h
þ Bios-Extensions (Bios sections outside of Main Bios)
Where úType úSize úCopyright
----------------------------------------------------------------------------
C000h Ext. Bios 32KB (c)1988 Tseng Laboratories, Inc. 08/16/95
V8.00N
ISA PnP-Bios
============
Version : 1.0
Event Flag at : 0000:0000
Real Mode Entry : F000:7514
Prot. Mode Entry: 0F0000:7531
OEM ID (HEX) : @@@0000
Version String :
Devices : 14 OnBoard (Nodes), 0 PnP-Adapter(s)
Dev.ú Device ú Adapterú Adapter Name
----------------------------------------------------------------------
No PnP Adapter found
List of On-Board-Devices (Nodes)
================================
No. Name úDevice type, description, setup
---------------------------------------------------------------------------
00 PNP0A03 ID's: 06h/04h/00h => PCI Bridge
additional Product Name: PCI Bus
I/O fix: CF8h-CFFh
I/O fix: 26h-27h
I/O fix: E6h-E6h
I/O fix: 80h-80h
32Bit-FixMEM: FFFE0000h-FFFFFFFFh ROM
Cfg..-Typ: System must reboot
01 PNP0800 ID's: 04h/01h/00h => Audio Controller
additional Product Name: Speaker
I/O fix: 61h-61h
Cfg..-Typ: System must reboot
02 PNP0C01 ID's: 05h/00h/00h => RAM
additional Product Name: Erweiterung for PnP BIOS
16Bit-MEM: 0h-0h (A00h)
16Bit-MEM: E0000h-E0000h (200h) ROM shadowable
Cfg..-Typ: System must reboot
03 PNP0303 ID's: 09h/00h/00h => Keyboard Controller
additional Product Name: MFII- or MS Natural Keyboard
IRQ 1, edgetriggered
I/O fix: 60h-60h
I/O fix: 64h-64h
Cfg..-Typ: System must reboot
04 PNP0C04 ID's: 0Bh/02h/00h => Pentium CPU/NPU
additional Product Name: Numeric Coprocessor
IRQ 13, edgetriggered
I/O fix: F0h-FFh
Cfg..-Typ: System must reboot
05 PNP0501 ID's: 07h/00h/02h => COM with 16550-UART
additional Product Name: COM port
IRQ 4, leveltriggered
I/O var: Base min 3F8h Base max 3F8h, Range=8h
Cfg..-Typ: configurable at runtime
configurable can be disabled
06 PNP0501 ID's: 07h/00h/02h => COM with 16550-UART
additional Product Name: COM port
IRQ 3, leveltriggered
I/O var: Base min 2F8h Base max 2F8h, Range=8h
Cfg..-Typ: configurable at runtime
configurable can be disabled
07 PNP0401 ID's: 07h/01h/00h => LPT Standard
additional Product Name: ECP printer port
I/O var: Base min 0h Base max 0h, Range=0h
I/O var: Base min 0h Base max 0h, Range=0h
Cfg..-Typ: configurable at runtime
configurable can be disabled
08 PNP0700 ID's: 01h/02h/00h => Floppy Controller
additional Product Name: Standard Floppy Controller
IRQ 6, leveltriggered
DMA 2, Timing Type: Standard 8-Bit-Transfer
I/O var: Base min 3F0h Base max 3F0h, Range=6h
I/O var: Base min 3F7h Base max 3F7h, Range=1h
Cfg..-Typ: System must reboot
configurable can be disabled
capable of being the primary IPL-device
09 PNP0200 ID's: 08h/01h/01h => ISA DMA Controller 8237
additional Product Name: DMA Controller
DMA 4, Timing Type: Standard 8-Bit-Transfer
I/O var: Base min 0h Base max 0h, Range=10h
I/O var: Base min 81h Base max 81h, Range=Fh
I/O var: Base min C0h Base max C0h, Range=20h
Cfg..-Typ: System must reboot
10 PNP0000 ID's: 08h/00h/01h => ISA Interrupt Controller 8259
additional Product Name: Programm. Interrupt Ctrl.
IRQ 2, leveltriggered
I/O var: Base min 20h Base max 20h, Range=2h
I/O var: Base min A0h Base max A0h, Range=2h
Cfg..-Typ: System must reboot
11 PNP0100 ID's: 08h/02h/01h => ISA Timer 8254
additional Product Name: System clock
IRQ 0, leveltriggered
I/O var: Base min 40h Base max 40h, Range=4h
Cfg..-Typ: System must reboot
12 PNP0B00 ID's: 08h/03h/01h => ISA Real Time Clock
additional Product Name: CMOS-/Real Time Clock
IRQ 8, leveltriggered
I/O var: Base min 70h Base max 70h, Range=2h
Cfg..-Typ: System must reboot
13 PNP0F13 ID's: 09h/02h/00h => Mouse Port
additional Product Name: n/a
IRQ 12, leveltriggered
Cfg..-Typ: System must reboot
Video Adapter, Monitor
======================
Primary Adapter : VGA (VESA)
VGA Adapter Model : n/a
BIOS Copyright : Copyright(c)1988 Tseng Laboratories, Inc. 08/
Chipset : Tseng ET 4000/w32p Rev.C
RAM-DAC/AGP/PCI : PCI-compat., IRQ:0
Video RAM : 1 MB
VESA Compatibilty : Vesa-Bios 1.32, VESA VBE 1.0 (Status: active)
Secondary Adapter : none
Video Mode : 3h, Color, Text, 80 x 25
Dots / Lines : 16 * 400
Video Pages : 8 (presently: 0)
Monitor (DDC-Info)
Model : n/a
Description: n/a
Measures : n/a
PM Support : n/a
Frequ.(Hz) : n/a
VESA SuperVGA Bios - Copyright and Modes
========================================
Version/OEM : V 1.32, Tseng Labs ET4000
Vendor : (VBE 2.0 required)
Product Name: (VBE 2.0 required)
Produkt Rev.: (VBE 2.0 required)
Mode úTypúBitúWindow 1/2 ú Resolut. ú Colorsú RAMú Format
---------------------------------------------------------------------------
100 GRF 8 -/w r/- 640x 400 256 249 packed
101 GRF 8 -/w r/- 640x 480 256 299 packed
102 GRF 4 -/w r/- 800x 600 16 234 EGA/VGA 16C.
103 GRF 8 -/w r/- 800x 600 256 468 packed
104 GRF 4 -/w r/- 1024x 768 16 383 EGA/VGA 16C.
105 GRF 8 -/w r/- 1024x 768 256 767 packed
106 GRF 4 -/w r/- 1280x1024 16 639 EGA/VGA 16C.
107 GRF 8 -/w r/- 1280x1024 256 1279 packed
108 TXT 4 -/w r/- 80x 60 16 2 Text Mode
109 TXT 4 -/w r/- 132x 25 16 1 Text Mode
10C TXT 4 -/w r/- 132x 60 16 3 Text Mode
22 TXT 4 -/w r/- 132x 44 ? 2 Text Mode
24 TXT 4 -/w r/- 132x 28 ? 1 Text Mode
2A TXT 4 -/w r/- 100x 40 ? 1 Text Mode
2D GRF 8 -/w r/- 640x 350 ? 218 packed
10D GRF 16 -/w r/- 320x 200 32768 124 True-/HiColor
5D GRF 16 -/w r/- 640x 350 ? 437 True-/HiColor
110 GRF 16 -/w r/- 640x 480 32768 599 True-/HiColor
5F GRF 16 -/w r/- 640x 400 ? 499 True-/HiColor
113 GRF 16 -/w r/- 800x 600 32768 937 True-/HiColor
10E GRF 16 -/w r/- 320x 200 65536 124 True-/HiColor
6D GRF 16 -/w r/- 640x 350 ? 437 True-/HiColor
111 GRF 16 -/w r/- 640x 480 65536 599 True-/HiColor
6F GRF 16 -/w r/- 640x 400 ? 499 True-/HiColor
114 GRF 16 -/w r/- 800x 600 65536 937 True-/HiColor
112 GRF 24 -/w r/- 640x 480 16,7Mio 899 True-/HiColor
116 GRF 16 -/w r/- 1024x 768 32768 1535 True-/HiColor
117 GRF 16 -/w r/- 1024x 768 65536 1535 True-/HiColor
115 GRF 24 -/w r/- 800x 600 16,7Mio 1405 True-/HiColor
-
- Posts: 13
- Joined: Wed Oct 26, 2005 5:51 pm
If i understand you right GL then the problem why the Live CD Version of
Reactos immediatly freeze after two seconds is that it don't have
the right VGA Driver included in the Live CD.
If i understand you right also this needed VGA driver is for some Reason
included in the Install Version of the Reactos CD and that's why i have
the possibility to boot and load drivers in the Install Version of
reactos but not in the Live CD version.
If this is true.
Exist a reason why this driver is not included in the Live CD.
If this reason don't exist is there some plans to inlcude this VGA-Driver in the near Future in the Live CD Version.
Thanks till yet for the Help.
Reactos immediatly freeze after two seconds is that it don't have
the right VGA Driver included in the Live CD.
If i understand you right also this needed VGA driver is for some Reason
included in the Install Version of the Reactos CD and that's why i have
the possibility to boot and load drivers in the Install Version of
reactos but not in the Live CD version.
If this is true.
Exist a reason why this driver is not included in the Live CD.
If this reason don't exist is there some plans to inlcude this VGA-Driver in the near Future in the Live CD Version.
Thanks till yet for the Help.
Hi
It have been talk about how it should be done. and we are aware some machine can not run LiveCD. For it does not work with VBE 1.x. But some work was inprogress to add VBE 1.x to the VBE drv. But I lost my VBE 1.x card. and therefor no work in progress. for adding VBE 1.x to VBE drv and therefor you need VGA drv or a 3d parti driver.
It have been talk about how it should be done. and we are aware some machine can not run LiveCD. For it does not work with VBE 1.x. But some work was inprogress to add VBE 1.x to the VBE drv. But I lost my VBE 1.x card. and therefor no work in progress. for adding VBE 1.x to VBE drv and therefor you need VGA drv or a 3d parti driver.
-
- Posts: 13
- Joined: Wed Oct 26, 2005 5:51 pm
Hello GL !
I was just on the ebay web site to look if i can find a Graphic Card which support VBE1.x
If you have interesst and time to develop the VBE1.x support
i can try to buy such a very old Card for you.
With such a card you should no more have problems to develop the VBE1.x driver.
If i am not wrong such old cards can be buyed for only 1 Euro. Thats about 1.5 dollar.
The shipment of the Card to Sweeden could more Cost then the Card.
Here is a Link from the needed Ebay Section.
There are hundreds of Graphic Cards with a price of only 1 Euro.
If you are interested tell me per privet mail which card could be work for you.
http://computer.listings.ebay.de:80/Gra ... ngItemList
In switzerland such Cards can be buyed for less than 1 Euro some are listed with a price of 0.0 at the moment.
http://computer.ricardo.ch/cgi-bin/auk? ... erlist=30;
Maybe for you is better to buy one from Sweden.
How much is 1 Swedish krone to one Euro.
http://my.qxl.se/default/defaultlistelse.asp?catg=11069
I was just on the ebay web site to look if i can find a Graphic Card which support VBE1.x
If you have interesst and time to develop the VBE1.x support
i can try to buy such a very old Card for you.
With such a card you should no more have problems to develop the VBE1.x driver.
If i am not wrong such old cards can be buyed for only 1 Euro. Thats about 1.5 dollar.
The shipment of the Card to Sweeden could more Cost then the Card.
Here is a Link from the needed Ebay Section.
There are hundreds of Graphic Cards with a price of only 1 Euro.
If you are interested tell me per privet mail which card could be work for you.
http://computer.listings.ebay.de:80/Gra ... ngItemList
In switzerland such Cards can be buyed for less than 1 Euro some are listed with a price of 0.0 at the moment.
http://computer.ricardo.ch/cgi-bin/auk? ... erlist=30;
Maybe for you is better to buy one from Sweden.
How much is 1 Swedish krone to one Euro.
http://my.qxl.se/default/defaultlistelse.asp?catg=11069
Last edited by Soft-ICE-Crack on Sun Dec 25, 2005 4:14 pm, edited 1 time in total.
-
- Posts: 9
- Joined: Mon Dec 26, 2005 3:44 pm
hi, since i have somewhere in the deeps of my flat old outdated hardware more i can hold in my mind, i whould be honored if i can help with this, tell me just wich class of graphics adapter this is you reqire for testing, and i probably can send u something for free... (incl. shipping if it is not too much).
since i am not a real coder but a hardware freak (collector) this could be a good way to support this amazing project
since i am not a real coder but a hardware freak (collector) this could be a good way to support this amazing project
Who is online
Users browsing this forum: No registered users and 28 guests