Blog: Inter-process miscommunication

Here you can discuss ReactOS related topics.

Moderator: Moderator Team

Z98
Release Engineer
Posts: 3379
Joined: Tue May 02, 2006 8:16 pm
Contact:

Blog: Inter-process miscommunication

Post by Z98 » Sat Oct 04, 2014 10:50 pm


Webunny
Posts: 1201
Joined: Sat Apr 28, 2012 1:30 pm

Re: Blog: Inter-process miscommunication

Post by Webunny » Sun Oct 05, 2014 8:34 pm

While short, it was good to hear progress has been made yet again. It's also refreshing to see we get help from third parties like that.

justincase
Posts: 434
Joined: Sat Nov 15, 2008 4:13 pm

W00T

Post by justincase » Mon Oct 06, 2014 7:08 pm

♪ "I'm so excited, and I just can't hide it ..." ♪
I'll be starting a new shell-experiments build when I get home tonight. :twisted:
I reserve the right to ignore any portion of any post if I deem it not constructive or likely to cause the discussion to degenerate.

Pi_User5
Posts: 752
Joined: Thu May 01, 2014 4:18 am
Location: United States

Re: Blog: Inter-process miscommunication

Post by Pi_User5 » Tue Oct 07, 2014 1:17 am

I'll be starting a new shell-experiments build when I get home tonight. :twisted:
Where would I get this build at? Do I have to compile it or is it an ISO?
I use ReactOS on real hardware. Will you? My Computers: https://www.reactos.org/wiki/PC_ROS_Rigs Go all the way to the bottom.

Image

IamMomotaros
Posts: 7
Joined: Mon May 19, 2014 6:55 am

Re: Blog: Inter-process miscommunication

Post by IamMomotaros » Tue Oct 07, 2014 3:01 am

Pi_User5 wrote:
I'll be starting a new shell-experiments build when I get home tonight. :twisted:
Where would I get this build at? Do I have to compile it or is it an ISO?
Yeah, I'm also interested too. It sounds like an extreme break through in Reactos.
Can't wait. :D :D

justincase
Posts: 434
Joined: Sat Nov 15, 2008 4:13 pm

Re: Blog: Inter-process miscommunication

Post by justincase » Tue Oct 07, 2014 3:55 am

ReactOS is actually one of the easiest open source projects to build for yourself (especially if you take the size and complexity of the project into consideration).
Basically you download the RosBE installer, Install it, choose a place for your source and build folders, and type a few commands in the command-prompt.
More detailed information is available in the development guide, and if you get stuck anywhere just ask on the forums or on one of the IRC Channels.

I'll consider uploading the ISO once I finish building it, but I don't know how long it'll take me to get a successful build (I compile ReactOS in a QEMU Virtual Machine running on Windows, so it's really slow, and on top of that I lost my build script, so I'll either have to write a new one or just do it manually).
I reserve the right to ignore any portion of any post if I deem it not constructive or likely to cause the discussion to degenerate.

Pi_User5
Posts: 752
Joined: Thu May 01, 2014 4:18 am
Location: United States

Re: Blog: Inter-process miscommunication

Post by Pi_User5 » Tue Oct 07, 2014 5:19 am

If you could upload the ISO I would greatly appreciate it. :D My internet is really slow (79K) and the only way I ever compiled ReactOS was downloading the 0.3.15 source code in a zip file from Source forge. I tried using the ssvn create command in RosBe and after an hour it was still downloading. If I could get instructions on how to build an ISO with the shell experiments I might be able to leave my computer running overnight or download it when I have faster internet available.
I use ReactOS on real hardware. Will you? My Computers: https://www.reactos.org/wiki/PC_ROS_Rigs Go all the way to the bottom.

Image

Pi_User5
Posts: 752
Joined: Thu May 01, 2014 4:18 am
Location: United States

Re: Blog: Inter-process miscommunication

Post by Pi_User5 » Tue Oct 07, 2014 1:56 pm

I downloaded the source code revision bootcd-64577-dbg. How would I do the new shell experiments?
I use ReactOS on real hardware. Will you? My Computers: https://www.reactos.org/wiki/PC_ROS_Rigs Go all the way to the bottom.

Image

Z98
Release Engineer
Posts: 3379
Joined: Tue May 02, 2006 8:16 pm
Contact:

Re: Blog: Inter-process miscommunication

Post by Z98 » Tue Oct 07, 2014 5:04 pm

None of the shell stuff is in trunk, you have to go off of David's shell-experiments branch.

Pi_User5
Posts: 752
Joined: Thu May 01, 2014 4:18 am
Location: United States

Re: Blog: Inter-process miscommunication

Post by Pi_User5 » Tue Oct 07, 2014 6:01 pm

None of the shell stuff is in trunk, you have to go off of David's shell-experiments branch.
How would I go about getting this branch?
I use ReactOS on real hardware. Will you? My Computers: https://www.reactos.org/wiki/PC_ROS_Rigs Go all the way to the bottom.

Image

Z98
Release Engineer
Posts: 3379
Joined: Tue May 02, 2006 8:16 pm
Contact:

Re: Blog: Inter-process miscommunication

Post by Z98 » Tue Oct 07, 2014 6:12 pm

By checking out his branch.

svn.reactos.org/reactos/branches/shell-experiments/

EmuandCo
Developer
Posts: 4317
Joined: Sun Nov 28, 2004 7:52 pm
Location: Germany, Bavaria, Steinfeld
Contact:

Re: Blog: Inter-process miscommunication

Post by EmuandCo » Tue Oct 07, 2014 6:26 pm

And then build it with our RosBE. ^^ anything else is not bein built by default.
Image
ReactOS is still in alpha stage, meaning it is not feature-complete and is recommended only for evaluation and testing purposes.

Pi_User5
Posts: 752
Joined: Thu May 01, 2014 4:18 am
Location: United States

Re: Blog: Inter-process miscommunication

Post by Pi_User5 » Tue Oct 07, 2014 6:47 pm

And then build it with our RosBE. ^^ anything else is not bein built by default.
Does it have to built with ReactOS or on it's own? Could I have directions on how to compile it?
I use ReactOS on real hardware. Will you? My Computers: https://www.reactos.org/wiki/PC_ROS_Rigs Go all the way to the bottom.

Image

Z98
Release Engineer
Posts: 3379
Joined: Tue May 02, 2006 8:16 pm
Contact:

Re: Blog: Inter-process miscommunication

Post by Z98 » Tue Oct 07, 2014 6:55 pm

What Daniel is saying is that branches are not compiled by the project's buildbots by default. A branch IS for all intents and purposes a complete ReactOS checkout. It just might happen to have code that is not ready for general distribution because of stability or incompleteness. For building, see https://www.reactos.org/development/build-environment

Pi_User5
Posts: 752
Joined: Thu May 01, 2014 4:18 am
Location: United States

Re: Blog: Inter-process miscommunication

Post by Pi_User5 » Tue Oct 07, 2014 6:59 pm

I should download the source code and replace the old explorer files with the new files and build?
I use ReactOS on real hardware. Will you? My Computers: https://www.reactos.org/wiki/PC_ROS_Rigs Go all the way to the bottom.

Image

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], DotBot [Crawler] and 2 guests