Installation auf USB-Stick funktioniert nicht

Hier können Sie auf Deutsch diskutieren. Bedenken Sie, dass Sie in den englischen Foren mehr Nutzer ansprechen.

Moderators: frik85, EmuandCo, Dr. Fred

Post Reply
vaili
Posts: 6
Joined: Mon Mar 04, 2019 9:50 pm

Installation auf USB-Stick funktioniert nicht

Post by vaili »

Hallo,
ich wollte ReactOS auf einem USB-Stick installieren, da das Board davon booten kann. Das Problem: egal ob mit Anlegen einer Partition oder Verwenden einer vorhandenen, schnell oder normal formatiert, FAT oder BTRFS - das Formatieren bleibt immer bei 0 % hängen. Wenn ich einen partitionierten und formatierten USB-Stick verwende, bleibt der Installationsprozess bei "Erstelle eine Liste der zu kopierenden Dateien" hängen...
Das Booten von diesem Stick mit diesem PC funktioniert; getestet mit FreeDOS, Debian 9, Raspbian x86.
ReactOS funktioniert von der LiveCD wunderbar. Zu installieren versuchte ich 0.4.9, 0.4.10 und jetzt 0.4.11.

Gibt es da eine Lösung? Ich wollte keine alte HD einbauen.

Danke vorab!
User avatar
EmuandCo
Developer
Posts: 4722
Joined: Sun Nov 28, 2004 7:52 pm
Location: Germany, Bavaria, Steinfeld
Contact:

Re: Installation auf USB-Stick funktioniert nicht

Post by EmuandCo »

http://vgal.ru.com/ Versuch doch mal an diesen Versionen. Da ist der neue USB Stack schon am laufen.
ReactOS is still in alpha stage, meaning it is not feature-complete and is recommended only for evaluation and testing purposes.

If my post/reply offends or insults you, be sure that you know what sarcasm is...
vaili
Posts: 6
Joined: Mon Mar 04, 2019 9:50 pm

Re: Installation auf USB-Stick funktioniert nicht

Post by vaili »

Danke für die schnelle Antwort! Obwohl das OS _noch_nicht_ganz_ auf dem Level von Debian ist, ist das Forum schon so schnell wie das debianforum.de.

Leider zählt russisch nicht zu den von mir verstandenen Sprachen, englich oder spanisch gehen ja noch...
Nichtsdestotrotz habe ich bootusb-ReactOS-0.4.10-vgal.iso getestet, komme aber nicht einmal so weit wie mit den Original ReactOS-Images. Direkt nach dem Laden der Boot-Treiber bleibt der PC mit einem schwarzen Bildschirm stehen.

Ich glaube auch nicht, dass es am USB-Stack liegt, schließlich kann ich mit der Live-Version auf den Stick zugreifen. Es hat vielmehr den Anschein, als würde der USB-Stick - sobald vom Installer als Installationsziel erkannt - nicht mehr beschrieben werden können.

Danke Dir!

Ich bleibe jedenfalls dran, vielleicht tut sich ja noch was in den nächsten Versionen. Ein ReactOS auf einem USB-Stick wäre schon sehr viel sinnvoller einzusetzen als eines in einer VM.
User avatar
EmuandCo
Developer
Posts: 4722
Joined: Sun Nov 28, 2004 7:52 pm
Location: Germany, Bavaria, Steinfeld
Contact:

Re: Installation auf USB-Stick funktioniert nicht

Post by EmuandCo »

Naja, booten von USB ist etwas anderes als nur darauf zugreifen. Aber sehr bald kommt das neue USB mit USB-Boot relativ stabil auch in den Hauptzweig von ReactOS und dann sollte das auch laufen.
ReactOS is still in alpha stage, meaning it is not feature-complete and is recommended only for evaluation and testing purposes.

If my post/reply offends or insults you, be sure that you know what sarcasm is...
vaili
Posts: 6
Joined: Mon Mar 04, 2019 9:50 pm

Re: Installation auf USB-Stick funktioniert nicht

Post by vaili »

Ja, dann freu ich mich da drauf. Mein IDE-CF sollte DOS vorbehalten bleiben.

Ich habe gerade noch das liveusb-ReactOS-0.4.10-vgal.iso im Debug-Modus laufen lassen, es hängt vermutlich an der gleichen Stelle wie das bootusb-ReactOS-0.4.10-vgal.iso. Das Log-Fenster zeigt als letzten Eintrag driver/swenum.sys. Dabei muss ich es dann wohl belassen.

Grüße
Reactions
Posts: 211
Joined: Mon Dec 31, 2018 3:30 am

Re: Installation auf USB-Stick funktioniert nicht

Post by Reactions »

I have a work around here.

viewtopic.php?f=4&t=13266&start=15
Please support/share my Patreon! Helps so much! https://www.patreon.com/reactions
vaili
Posts: 6
Joined: Mon Mar 04, 2019 9:50 pm

Re: Installation auf USB-Stick funktioniert nicht

Post by vaili »

Thanks,
I've no problem with mouse or keyboard, my problem is writing to the usb-stick as c:\ during installation.
I think I'll wait until the usb-stack has been fixed.
Reactions
Posts: 211
Joined: Mon Dec 31, 2018 3:30 am

Re: Installation auf USB-Stick funktioniert nicht

Post by Reactions »

vaili wrote: Tue Mar 05, 2019 6:25 pm Thanks,
I've no problem with mouse or keyboard, my problem is writing to the usb-stick as c:\ during installation.
I think I'll wait until the usb-stack has been fixed.
That should fix all usb devices.
Please support/share my Patreon! Helps so much! https://www.patreon.com/reactions
vaili
Posts: 6
Joined: Mon Mar 04, 2019 9:50 pm

Re: Installation auf USB-Stick funktioniert nicht

Post by vaili »

I thought, how should deleting the usb-driver fix my problem writing to an usb-stick? But according to your hints I tried it out.
I burned a ReactOS-0.4.11.iso without usbehci.sys to a cdrom and started booting. During the boot process I skipped the message "unable to load usbehci.sys" - ok, choosing language - ok. But, as expected, i got the message "Setup could not find a harddisk".
Ok, now I'm sure - deleting the usb-driver is not helpful for writing to an usb-stick...

Greetings

Hope, my english is readable... Normally I use foreign languages only in mode RO.
vaili
Posts: 6
Joined: Mon Mar 04, 2019 9:50 pm

DE: Installation auf USB-Stick funktioniert nicht

Post by vaili »

Kurze Zusammenfassung der letzten Posts auf deutsch:

Reactions hat mich freundlicherweise auf die USB-Problematik und seine Erfahrungen damit aufmerksam gemacht und einen Lösungsvorschlag unterbreitet. Danke nochmals dafür!

Dieser bestand darin, das ReactOS-0.4.11.iso ohne usbehci.sys auf CD zu brennen. Das ISO funktioniert auch (mit ISO Master unter Lubuntu 18.04 erstellt), allerdings tritt das Problem auf, dass aufgrund der fehlenden usbehci.sys der USB-Stick als Installationsziel nicht gefunden werden kann.
ThFabba
Developer
Posts: 293
Joined: Sun Jul 11, 2010 11:39 am

Re: Installation auf USB-Stick funktioniert nicht

Post by ThFabba »

vaili wrote: Tue Mar 05, 2019 1:51 pm Ich habe gerade noch das liveusb-ReactOS-0.4.10-vgal.iso im Debug-Modus laufen lassen, es hängt vermutlich an der gleichen Stelle wie das bootusb-ReactOS-0.4.10-vgal.iso. Das Log-Fenster zeigt als letzten Eintrag driver/swenum.sys. Dabei muss ich es dann wohl belassen.
Um mal wieder auf die eigentliche Geschichte zurückzukommen: hier bräuchten wir 'ne Debug-Log, um in irgendeiner Art weiter zu kommen. Falls Deine Kiste keine serielle Schnittstelle hat, könnte "ReactOS (Screen)" funktionieren.
https://reactos.org/wiki/Debugging#Debu ... t_messages
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests