Torontron/Winnitron using ReactOS instead

Here you can discuss ReactOS related topics.

Moderator: Moderator Team

Post Reply
Posts: 21
Joined: Mon Dec 06, 2004 7:16 pm

Torontron/Winnitron using ReactOS instead

Post by nitrofurano » Sun Jan 22, 2012 7:32 pm

I don't know if anyone here know something about arcade-machine indie projects like Torontron or Winnitron


the issue is these indie arcade machines runs ms-windows - is someone about to try if machines like these can be built using ReactOS instead of ms-windows?

Posts: 375
Joined: Sat May 12, 2007 9:29 am

Re: Torontron/Winnitron using ReactOS instead

Post by Pisarz » Sun Jan 22, 2012 10:31 pm

It highly depends from the hardware on which you're trying to put ROS instead of MS Windows and software which would be ran on it.

Just try it. If it won't work, you could put Windows back instead and wait for ROS to be "complete enough" to fulfill the task.

Posts: 133
Joined: Sun Aug 30, 2009 4:42 pm

Re: Torontron/Winnitron using ReactOS instead

Post by livestrong2109 » Mon Jan 23, 2012 6:12 am

You can try and do it with an old serial port controller but the issue with this project is that most MAME setups nowadays are highly relient on USB controllers. Most MAME emulators though should run on ROS without a problem though. I say go for it if you have the hardware and time, however there are full blown DVD based puppy and cent based linix distros dedicated to arcade boxes that would likely do a better job as they are custom build for MAME setups and have tons of Controler drivers and USB support. However like I said if your goal is to build something to suppoert the project then I say go ahead just know that your going to need to either A) use serial inputs. or B) Map a keyboard controler to your MAME controler.

ROS has limited USB support for keyboards so here is one solution from our friends at ... ontroller/...
Wesley Howard
ROS Contributor - Web Developer

Post Reply

Who is online

Users browsing this forum: dizt3mp3r, Yandex [Bot] and 4 guests