[ros-dev] Using ROS cmd.exe with pipes (SqUe Squarious)

[SqUe Squarious]

Ty for your reply :)

I know all this solutions and the security matters, but this is part of a
bigger project and the traffic is encapsulated in safe way.

I am not looking for a command line solution, I am looking for C++ solution
to embed it in my project. I need a way to read data from cmd.exe and sent
data to cmd.exe. So the Pipes seemed me a good way, but they don't wont work
with ROS cmd.exe which is also needed for my project, although they work
just fine with M$ cmd.exe :S

Finaly I should mention once more, that the attached VS project is a "TEST"
on the code that I try to use. As a standalone program it may be useless,
but If there is a way to read/write data directly on a command-line process,
it will be easily to transfer that data over net within "the bigger project"
:P.

Anyway I like you pointed me in your way, that I hadn't clarify what I
really needed, and hope I did it better now :)

On 6/20/07, Jonathan Rennison <jonathan_rennison at hotmail.com> wrote:
>
> >Hi I am trying to use the cmd.exe of reactos (on Windows!) with
> redirected
> >stdin/out/err. What I try to make is a remote shell application over
> >internet, and this is an important requirement for me, that it will work
> >with reacto's cmd.exe.
> >I have build a test program that will redirect locally. open the process
> >(cmd.exe at least for now) and will forward output on a EditBox. The
> whole
> >process works quite well with the cmd.exe of M$ >Windows but its buggy
> with
> >the cmd.exe of reactos. More specifically when I start the redirection I
> >just get the current path and ">" usual prompt, but after that, the
> >communication gets unresponsive. >Whatever I send, there will be no
> return
> >messages.
> >I attached the test project, and I would like to advice me if there is a
> >better approach that will work for ROS cmd.exe too.
>
> What you have proposed is basically telnet.
> Extremely insecure.
>
> You really should consider using SSH or similar.
>
> Also it looks like you are using pipes to do the transferring from the
> code
> (but I could have misread it), and they only traverse local networks.
> You'd
> be better off with netcat or similar (if you're OK with low security).
> You could just use a command line like:
> netcat | cmd | netcat
>
> JGR
>
> _________________________________________________________________
> MSN Music http://music.msn.no Finn din favorittmusikk blant nesten 1
> million
> låter
>
>
> _______________________________________________
> Ros-dev mailing list
> Ros-dev at reactos.org
> http://www.reactos.org/mailman/listinfo/ros-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.reactos.org/pipermail/ros-dev/attachments/20070620/0802fbda/attachment.html