[ros-dev] RE: [ros-kernel] BootCD doesn't boot...

Richard Campbell eek2121 at comcast.net
Tue Sep 28 17:23:15 CEST 2004


But if you use an OLD binutils then you get a crash.

Casper Hornstrup wrote:

>You a using a too new binutils? I think it was thomas that spotted
>that the support for forwarded exports is broken in the new release
>of binutils.
>
>Casper
>
>  
>
>>-----Original Message-----
>>From: ros-dev-bounces at reactos.com 
>>[mailto:ros-dev-bounces at reactos.com] On Behalf Of Richard Campbell
>>Sent: 28. september 2004 22:08
>>To: ReactOS Development List
>>Subject: Re: [ros-dev] RE: [ros-kernel] BootCD doesn't boot...
>>
>>That's WITH atapi debug messages on and a clean make.
>>
>>(ke/i386/kernel.c:311) CPU supports PAE mode
>>(ke/i386/kernel.c:322) CPU doesn't run in PAE mode
>>(ke/i386/kernel.c:327) CPU Vendor: AuthenticAMD
>>(ke/i386/kernel.c:331) CPU Model:  AMD Athlon(tm) XP 2200+
>>(ke/i386/kernel.c:334) Ke386CacheAlignment: 64
>>(ke/i386/kernel.c:337) Ke386L1CacheSize: 128kB
>>(ke/i386/kernel.c:341) Ke386L2CacheSize: 256kB DriverBase for 
>>\SystemRoot\system32\drivers\pci.sys: dcc02000 Peripheral 
>>Component Interconnect Bus Driver DriverBase for 
>>scsiport.sys: dcc0c000 DriverBase for atapi.sys: dcc19000
>>(ldr/loader.c:1468) LdrPEGetExportByName(): failed to find 
>>NTOSKRNL.RtlConvertUlongToLargeInteger
>>(ldr/loader.c:1553) Failed to import
>>NTOSKRNL.RtlConvertUlongToLargeInteger from scsiport.sys 
>>DriverBase for class2.sys: dcc27000 DriverBase for cdrom.sys: 
>>dcc31000 DriverBase for disk.sys: dcc39000 DriverBase for 
>>vfatfs.sys: dcc42000 DriverBase for bootvid.sys: dcc57000 
>>DriverBase for cdfs.sys: dcc78000 DriverBase for ndis.sys: dcc85000
>>(io/arcname.c:56) IoCreateArcNames() called
>>(io/arcname.c:61) Floppy drives: 0
>>(io/arcname.c:86) Disk drives: 0
>>(io/arcname.c:163) CD-ROM drives: 0
>>(io/arcname.c:187) IoCreateArcNames() done
>>(io/arcname.c:346) multi(0)disk(0)cdrom(159)\reactos /MININT 
>>/DEBUGPORT=COM1
>>(io/arcname.c:353) multi(0)disk(0)cdrom(159)\reactos
>>(io/arcname.c:359) Boot path: \reactos
>>(io/arcname.c:368) ARC name: multi(0)disk(0)cdrom(159)
>>(io/arcname.c:375) Booting from CD-ROM!
>>(io/arcname.c:319) Could not find ntoskrnl.exe 
>>IoCreateSystemRootLink FAILED: (0xc0000001) - 
>>%KERNEL-WRN-UNSUCCESSFUL UNSUCCESSFUL KeBugCheck at 
>>ke/main.c:687 Bug detected (code 7b param 0 0 0 0)
>>  INACCESSIBLE_BOOT_DEVICE
>>
>>
>>Frames: <ntoskrnl.exe: a859> <ntoskrnl.exe: a879> <C0082E12>
>><ntoskrnl.exe: c0a9> <C0083681> <ntoskrnl.exe: 115c>
>>
>>
>>Hartmut Birr wrote:
>>
>>    
>>
>>> 
>>>
>>>      
>>>
>>>>-----Original Message-----
>>>>From: ros-dev-bounces at reactos.com 
>>>>[mailto:ros-dev-bounces at reactos.com] On Behalf Of Richard Campbell
>>>>Sent: Tuesday, September 28, 2004 9:37 PM
>>>>To: ReactOS Development List
>>>>Subject: Re: [ros-dev] RE: [ros-kernel] BootCD doesn't boot...
>>>>
>>>>
>>>>Sorry, it got truncated:
>>>>
>>>>http://rafb.net/paste/results/3p680b91.html
>>>>
>>>>Richard Campbell wrote:
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>>(io/arcname.c:163) CD-ROM drives: 0
>>>
>>>There wasn't detected a cdrom drive. The next step is, you 
>>>      
>>>
>>should enable the
>>    
>>
>>>debug prints from atapi.c.
>>>
>>>- Hartmut
>>>
>>>
>>>_______________________________________________
>>>Ros-dev mailing list
>>>Ros-dev at reactos.com
>>>http://reactos.com:8080/mailman/listinfo/ros-dev
>>>
>>> 
>>>
>>>      
>>>
>>_______________________________________________
>>Ros-dev mailing list
>>Ros-dev at reactos.com
>>http://reactos.com:8080/mailman/listinfo/ros-dev
>>
>>    
>>
>
>_______________________________________________
>Ros-dev mailing list
>Ros-dev at reactos.com
>http://reactos.com:8080/mailman/listinfo/ros-dev
>
>  
>



More information about the Ros-dev mailing list